Triplett 9007 - Manual (Page 4)

Page 3
2.5 Follow the recommendations of any Trade Organizations or
Regulatory Agencies whose scope encompasses the use of
this meter. Failure to do so may result in damage to the
meter or injury to the user.
2.6 Do not open this meter for maintenance without first
disconnecting the test leads from all external circuitry.
Failure to observe this precaution may result in damage
to the meter or injury to the user.
2.7 Repairs and maintenance must only be carried out by
qualified service personnel or qualified electricians /
technicians who know the dangers of, and the safety rules
applicable to this type of equipment. Failure to observe this
precaution may result in damage to the meter or injury to
the user.
2.8 Always set the meter to the appropriate range or mode
before connecting it to the circuitry to be tested. Failure to
observe this precaution may result in damage to the meter
or injury to the user.
2.9 Check the condition of the test leads before making a
measurement. Do not use the test leads if there is damaged
insulation or exposed metal. Failure to observe this