Tri Tool 648RBL Clamshell Hydraulic 2 Piece - Manual (Page 31)

31
Model 648SB Low Profile Clamshell (2 Piece)
92-1146 : Rev. 131230
CUTTING SPEEDS AND FEEDS
Use 200 surface inches per minute (5080 surface millimeters per minute) for:
Stainless steels in general when no coolant is allowed, all heavy-wall tube
and some chrome/molybdenum steels.
Use 250 surface inches per minute (6350 surface millimeters per minute) for:
Mild steels and some thin-wall stainless steels when coolants are permitted
and applied.
Use 300 surface inches per minute (7620 surface millimeters per minute) for:
Aluminum and some thin-wall mild steel and tube with coolants.