Thinklogical Camera Fiber-Link Manual - Manual (Page 9)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 5 Rev. E, June 2012
2. Product Features
2.1 System Features
Each Camera Fiber-Link System includes the following features:

Supports all Camera-Link base (to full) configurations with pixel clocks 20-85 MHz

Supports 1 dual-base or 2 individual-base cameras (CFL-5000 and CFL-6000)

Fiber Count: CFL-3000
– 2 fibers
CFL-4000
– 3 fibers
CFL-5000 – 3 fibers
CFL-6000 – 4 fibers

Extend camera signals up to 350 meters (1150 feet) using standard multi-mode fiber

Transparent Camera-Link ® operation

Compact design: Units are self-contained and do not require user adjustments
HOUSING DIMENSIONS: 8.875 ” long x 5.44” wide x 1.19” high
(225.425 mm x 138.13 mm x 30.16 mm high)

Signal transmission via fiber optic cable – no RF interference

Serial Port (RJ45) with RS-232 Interface

Class 1 laser product

Screw lock (threaded) power connector

Chassis ground post

Compatible with user ’s own DC input

Customer supplied power 5V-12V
Power Enhancement Kit (optional)

Customer supplied power 12V-24V
Industrial Enhancement Kit (optional)

DIN rail connectors for mounting
Indicator LEDs

The Green LED near the power connector is lit when appropriate power is
connected to the power in port.

The Red LED is lit solid (near the camera link connectors) when there is a loss of
signal on the fiber.

The Red LED blinks if the fiber is installed properly but there is no clock from the
camera present.

The Red LED is OFF when the unit is receiving appropriate signals.