Thinklogical Camera Fiber-Link Manual - Manual (Page 15)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 11 Rev. E, June 2012
LASER Output 850 nanometers
Operating Temp
and Humidity
0 to 50°C (32 to 122°F), 5 to 95% RH, non-condensing
Pixel Clock 20 to 85 MHz
Bit Assignments
CFL-3000/CFL-5000/CFL-6000: Supports Base Configurations
CFL-4000: Supports Full/Medium/Base Configurations
Camera/Frame
Grabber Connector
CFL-3000: Camera Side -- (1) MDR-26 (supports Base only)
Frame Grabber Side -- (1) MDR-26 (supports Base only)
CFL-4000: Camera Side -- (2) MDR-26 (supports Full/Medium/Base)
Frame Grabber Side -- (2) MDR-26 (supports Full/Medium/Base)
CFL-5000: Camera Side -- (2) MDR-26 (supports Base only)
Frame Grabber Side -- (2) MDR-26 (supports Base only)
CFL-6000: Camera Side 1-- (1) MDR-26 (supports Base only)
Camera Side 2 -- (1) MDR-26 (supports Base only)
Frame Grabber Side -- (2) MDR-26 (supports Base only)
Dimensions
CFL-3000, CFL-4000, CFL-5000 and CFL-6000:
7.0
” x 5.44” x 1.19”
(177.80 x 138.13mm x 30.23mm)
Weights
Weight: 1 lb. per unit
Shipping Weight: 6 lbs.
Power Supply
Standard 5-12V: Supplied universal external power supply equipped with
threaded screw lock connector for each side.
Industrial 12-24V: Supplied universal external power supply equipped
with threaded screw lock connector for each side.
AC Adapter
Standard Version: Wall Mount (PWR-000022-R)
Input 100-240VAC, 50-60Hz
Industrial Version: Desktop (PWR-000033-R)
Input 90-264VAC, 47-63Hz,
DC Current
Camera Side: 1.5A, steady state; 2.5A, peak
Frame Grabber Side: 1.5A, steady state; 2.5A, peak
AC Power
Consumption
Camera Side: Initial Power Draw: 10W
Typical Input Power: 4.0W to 4.5W
Frame Grabber Side: Initial Power Draw: 10W
Typical Input Power: 3.75W to 4.5W
Warranty
12 months from date of purchase.
Extended warranties available at time of purchase.
Table 2: Technical Specifications