Thinklogical Camera Fiber-Link Manual - Manual (Page 13)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 9 Rev. E, June 2012
2.2.4. CFL-6000
The CFL-6000 Dual Camera Fiber-Link Receiver is a unique component designed for users who
have two cameras in different locations and where space is a concern. The Dual CFL-6000 Frame
Grabber receives optical data from two CFL-3000 Camera Side transmitters (over two optical
fibers each) and converts them back into video data to send out to a frame grabber base (CPU).
Each unit is housed in a compact, metal enclosure
(7.00” x 5.44” x 1.19”). The CFL-6000 is
available with SC- (standard), ST- or LC-type fiber optic connectors.
CAMERA 2
L2 ◄
L1 ►
S
E
R
IA
L
F
R
A
M
E
G
R
A
B
B
E
R
B
A
S
E
1
F
R
A
M
E
G
R
A
B
B
E
R
B
A
S
E
2
L1 ►
L2 ◄
CAMERA 1
Upper Connector Lower Connector
Extend Distribute Innovate
®
CAMERA
®
CAMERA FIBER-LINK
®
Digital Camera
Extension System CFL- 6000
HI-SPEED DUAL BASE
FRAME GRABBER SIDE
Powered by
MRTS Technology
Figure 5: CFL-6000 Frame Grabber Side (CFL-000M06-SCRX)
2.2.5. Power Enhancement Kit (Optional)
The entire line of Thinklogical ® Camera Fiber-Link Extenders features industrial enhancements,
including a screw lock (threaded) input-power connector designed to meet the needs of a rugged
industrial environment. The CFL-5000 and CFL-6000 models are available with input power
ranges of 5-12V (standard) or 12-24V (industrial). Users can also choose to use their own DC
input. A chassis ground post is included.
2.2.6 DIN Rails (Optional)
Each unit features DIN rail connectors for easy mounting, making it is possible to position your
cameras in any setting while keeping the computer in a secure location. (A mounting template is
included in Appendix D, pg. 34 for your convenience.)