Thinklogical Camera Fiber-Link Manual - Manual (Page 19)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 15 Rev. E, June 2012
3.2.2 Industrial Version: 12V-24V
For the Industrial Power Input Option, separate desktop AC-to-DC converters (Part Number
PWR-000033-R) are included. A power jack is provided on both units and accepts the +12VDC
input. The green power LED will light when the unit is receiving power.
The AC desktop power pack has a universal power rating (90-264 VAC, 47-63 Hz) and is also
supplied with a country-specific, industry standard AC Power Cord.
A separate +5V (CON-000120-R) or +12V (CON-000119-R) threaded screw-lock connector
is available for customers who prefer to use their own power source.
Figure 8: Two 12V –24V Desktop Power Supplies are provided with each Industrial
Version Camera Fiber-Link System.
4
.
Order of Installation Events
The following pages contain Quick Start Guides for each of the four CFL models available
from Thinklogical
® . Each guide contains specific information about the contents of your
Camera Fiber-Link System, as well as order of installation events and detailed connection
instructions.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!