Thinklogical Q-4300 Chassis Manual - Manual (Page 5)

Revision A
5 July 2011
and all modules and power supplies are hot swappable. The chassis may be rack or desktop mounted.
Installable modules include our DVI and SDI lines of extenders.
Each VQM DVI Transmitter (TX) Module features a video input and, in many cases, a local video
output which can be used for DDC modification and for displaying video at the source. The TX also
has fiber connectors used for transferring video and data to the Receiver. Status LEDS are
provided for system information.
Each VQM DVI Receiver (RX) Module features 2 video outputs. The video output on the left is
always the primary output. The RX also has fiber connectors used for transferring data to the TX
and receiving video and data
SDI Transmitter Modules feature dual 3G/HD/SD SDI video inputs and an RS422 Serial Port.
SDI Receiver Modules feature dual 3G/HD/SD SDI video outputs and an RS422 Serial Port.
1.2. Laser Information
All Q-4300 modules are designed and identified as Class 1 LASER products .
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.
2. System Features
2.1 General System Features
The Q-4300 chassis provides a rack mount for up to 4 modules. Single-Link DVI and Dual-Link DVI
modules are available with audio and networking options. SDI Modules that support two SD/HD signals
or one 3G signal (as well as dual-link HD-SDI) are also available. The Q-4300 can combine a variety
of modules for a space saving and cost effective solution to the challenges of the most
demanding applications.
Quad Module Rack Mount Chassis
Q-4300
enter POWER POWER
UPDATE
All physical connections to the Q-4300 use industry-standard connectors.