Thinklogical Q-4300 Chassis Manual - Manual (Page 10)

Revision A
10 July 2011
The Chassis Menu shows the following for 4 cards, plus the System menu:
*Card (1-4)
(Examples below=Card 1)
Card1 Tx/Rx
Tx/Rx=
Card1 Desc. Desc.=
Card1 Type Type=
Card1 Rev Rev=
Card1 Sw Rev Rev=
Card1 Serial Number S/N.=
Card1 Temp in C
Card1 SFP
Left
Card1 SFP Right
Card1 SFP LOS #21 Status=
Card1 SFP Des OK #21 Status=
Card1 Input
Port 1 / 2=,
Card1 DDC PROM Emula. Mode=
Card1 Load Default DDC Yes/No.=
Card1 Load 1080p DDC Yes/No.=
Card1 Acquire DDC Yes/No.=
Card1 Force DDC Mode=
*System
Rack Serial Number S/N.=
Allow FPGA Update Yes/No.=
Ctrl Temp in C
Fan Status F4 F3 F2 F1
Card Pres. C4 C3 C2 C1
Alarm Stat. FsC4C3C2C1Mn Alrm Act=,
Pwr Supp Pres. P1 P2
4.5 Firmware Upgrades
Firmware upgrades are available through Thinklogical ™. For technical assistance, please call us at
1-203-647-8700.
To update the Chassis firmware, use the KM download described below. To update a m odule‟s
firmware, go to Allow FPGA Update under the *System menu. Select Yes and load the update through
the front panel USB port using the FPGA Update, also described below.
KVM Download Procedure:
Firmware files and revision numbers are stored in the following:
http://ftp.thinklogical.com/ftp/visualization/updates/
Then select Firmware.zip