System features, General system features, H uman i nterface d evice) – Thinklogical Peripheral Extender Manual User Manual
Page 6

Extend Distribute Innovate
REVISION A
4
JUNE 2011
2. System Features
2.1. General System Features
The
OriginKVM 3125
is a 3 computer/1 user KVM switch that supports 2 dual-link DVI
video channels, RS232, line level audio for speakers, USB HID devices and a USB 2.0
port. Switching is performed by hotkeys or by using the out-of-band control menu, either on the
front panel or with a provided Remote Control Unit connected by a CAT5 Cable. Video 1 and
USB HID
(Human Interface Device)
are always switched simultaneously, while Video 2, Audio,
RS232, and USB 2.0 can be switched individually. This convenience allows the transfer of large
amounts of data between a computer and storage device to take place while maintaining the
user interface of a different computer.
The USB HID ports emulate a keyboard and mouse so that the connected computers do not
need to re-acquire their capabilities each time a switch is made and they are immediately
available upon switching. Many USB touch-screens and tablets are also supported on the USB
HID port.
Each OriginKVM 3125 system includes the following features:
Supports 2 video channels, either single-link or dual-link
Supports USB HID devices such as keyboards, mice, tablets and touch-screens
Dedicated USB 2.0 port
Internal universal power supply
Switching via front panel buttons, hotkeys or OBC (out-of-band control) menu
Switching can also be done with the provided Remote Control Unit (RJ45)
.
Caution! Replace with same type and rating fuse.
100-240V ~, 0.5A, 50/60 Hz T 2A, 250 VAC
U
S
E
O
N
L
Y
W
IT
H
2
5
0
V
F
U
S
E
HOST
CNTRL
U
P
D
A
T
E
S
REMOTE
USB HID
USB 2.0
DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK
LINE IN
CPU 1
RS232
DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK
LINE IN
CPU 2
RS232
DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK
LINE IN
CPU 3
RS232
DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK
LINE OUT
USER
RS232
Rear Panel of the
Origin
KVM
3125
Switch (KVM-003125).