Regulatory and safety compliance, Safety requirements, Symbols found on the product – Thinklogical Peripheral Extender Manual User Manual
Page 11: Regulatory compliance, North america, Australia & new zealand, European union, Declaration of conformity, 1 safety requirements, 2 regulatory compliance
Extend Distribute Innovate
REVISION A
9
JUNE 2011
5. Regulatory and Safety Compliance
5.1 Safety Requirements
5.1.1 Symbols Found on the Product
Markings and labels on the product follow industry-standard conventions. Regulatory markings found on
the products comply with standard requirements.
5.2 Regulatory Compliance
Thinklogical
™ LLC products are designed and made in the USA. Our products have been tested by a
nationally recognized testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations).
5.2.1 North America
These products comply with the following standards:
Safety
ANSI/UL60950-1: 1
st
Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
5.2.2 Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take corrective measures.
5.2.3 European Union
5.2.3.1 Declaration of Conformity
Manufacturers name and address:
Thinklogical
™, a subsidiary of Logical Solutions, LLC.
100 Washington Street
Milford, CT 06460 USA
Telephone: 1-203-647-8700
Product name: OriginKVM 3125
This product complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.