Thinklogical Peripheral Extender Manual - Manual (Page 18)

Extend Distribute Innovate
REVISION A 16 JUNE 2011
Appendix C: Out of Band Control for Apple Keyboard Users
LCD System Information and Programming LCD Navigation
If using an Apple Keyboard, once the firmware has been installed into the OriginKVM 3125, use the UP
arrow on the Navigation Pad to reach *Out of Band CTRL from the main menu. Then use the
RIGHT arrow to reach User Set HOT Key Scroll Lock. If not using an Apple Keyboard, leave this
setting as it is.
enter
User
Set HOT Key Scroll Lock
To make a change from the Alt. HOT Key menu, press enter. Use the UP or DOWN arrow to
access the available hot key options:
HOT Key (F13, F14, F15, LEFT CTRL, RIGHT CTRL or R or L CTRL, Scroll Lock).
Press enter to implement the change. Each keyboard is handled separately. The user may need to
repeat the procedure for User 2.
LEFT
CONTROL
RIGHT
CONTROL
F13 F14 F15
APPLE KEYBOARD
Alternate Key Strokes