Thinklogical Peripheral Extender Manual - Manual (Page 10)

Extend Distribute Innovate
REVISION A 8 JUNE 2011
3. 4. Installation
(Also see Appendix A: Quick Start Guide, on page 14.)
Console Connections:
1. Connect an AC Power Cord to the OriginKVM 3125 and turn the unit ON
2. Plug DVI Dual-Link Displays 1-2 into the DVI ports labeled DVI OUT Dual-Link 1 and 2. See
Appendix B (pg. 15) for Front Panel LCD Displays to read DDC Tables. Apple Keyboard
users, also see Appendix C on pg. 16.
3. Connect up to 3 USB HID devices (such as keyboard, mouse, tablet, etc.) and one USB 2.0
device to the four USB A ports. (USB 2.0 devices and devices that are not HID must be
connected to the port marked USB 2.0.) Connect your speakers or other audio output device
into the 3.5mm port labeled AUDIO OUT. Connect a DB9 Serial cable from the chassis to any
serial device. Connect an RJ45 cable from the chassis to the remote control unit.
4. Ensure the CPUs are turned OFF. Complete steps 5-8.
CPU 1 through 3 Port Connections:
5. Connect the included Dual-Link DVI cables (CBL000023-002MR) from the CPU 1 DVI Video
Card s to the OriginKVM 3125’s DVI IN Dual-Link IN 1 and 2.
6. Connect the included USB A to USB B cable (CBL000015-006FR) from the CPU 1 USB
Keyboard/Mouse Port to the OriginKVM 3125’s USB B IN from CPU 1 Port.
7. Connect the included 3.5mm to 3.5mm cable (CBL000016-006FR) from the CPU 1 Audio
Output to the OriginKVM 3125’s 3.5mm Audio IN from CPU 1 Port.
8. Repeat Steps 1-3 for CPUs 2 and 3, and then turn the CPUs ON.
Ensure that all system functions are operating properly.