Tech Source Raptor Drivers for Linux - Manual (Page 28)

Raptor Drivers for Linux Installation and Reference Manual
4-6
Section "Device"
Identifier "Raptor2.1KT"
Driver "rapt"
Card "TSI Raptor 2100T"
BusID "PCI:0:12:0"
Option "Device" "/dev/rap2kt0"
Option "ScaleCursPos" "on"
Option "Mode" "8"
# Option "TranspColor" "0x0a3246"
EndSection
Section "Screen"
Identifier "Raptor2100T"
Device "Raptor2.1KT"
Monitor "Sony DDM Rap2kt"
DefaultDepth 8
SubSection "Display"
Depth 8
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
# TSI Raptor 2100T XFree86 Configuration Sections
4.6.1 Monitor Section
This section contains configuration information for the
Sony DDM monitor and should remain unchanged.
4.6.2 Device Section
Identifier: Each instance of Raptor card should have a
unique identifier. This identifer is used in the
Screen section.
NOTE: The
BusID
value in the configuration file must be
changed manually. Please see the description below for details.