Tech Source Raptor Drivers for Linux - Manual (Page 26)

Raptor Drivers for Linux Installation and Reference Manual
4-4
8. To install the MOX package, type:
prompt#
cd /mnt/cdrom/linux/moxlib
prompt# rpm -Uvh tsimox-*.rpm
NOTE: You must install the MOX package if you plan on running
the cards in MOX mode. The MOX package is common to both
I-Class and T-Class cards.
4.4 New Device
One new device name is created in the
/dev
directory for each
Raptor card. It is denoted by
rap2kt#
for the Raptor 2100T,
raptfp#
for the Raptor 2500T and
rapifp#
for Raptor 3840T
and
rap1kt#
for the Raptor 1100T where
#
represents an
instance number assigned by the operating system. For
example,
/dev/rap2kt0
is the first Raptor 2100T card seen by
the system.
/dev/rap2kt1
will be the second Raptor 2100T
card seen by the system and so on.
4.5 Changing Resolution
The resolutions for Raptor 2100T and Raptor 2500T are fixed.
They are shown in the table below. The resolution of the 1100T
and Raptor 3840T can be changed by changing the value of the
Modes
field in the
Screen
section of
XF86Config
. See Section
5.7 for more information.
Graphics Card Resolution Monitor Supported Interface
Raptor 2100T 2048x2048 Sony DDM 2800 Analog
2560x2048 TSI 2500 FPS Raptor 2500T
2048x2048 TSI 2100 FPS
Digital
Raptor 1100T Up to
1920x1200 Various Analog
Raptor 3840T Up to
3840x2400 9.2 Mega Pixel
Color Display Digital