Tech Source Raptor 4000 (for Solaris) - Manual (Page 7)

3
Chapter 1
INTRODUCTION
1.1 Overview
Thank you for purchasing a Tech Source, Inc. Raptor graphics
card for use with your Sun PCI/PCI Express desktop/server. This
manual describes the installation and configuration of the Raptor
graphics card and the accompanying software. All systems vary
somewhat, therefore some knowledge of the features of your
system and a basic understanding of UNIX shell commands are
helpful during the software installation process.
From this point forward, Tech Source, Inc. will be referred to as
Tech Source or TSI.
The software runs on Sun PCI desktops/servers and supports the
Raptor 4000/4000e graphics cards. The software is provided on a
CD-ROM and consists of:
• Raptor device drivers for Solaris
• Raptor loadable module (DDX) for X Windows
• MOX extension loadable module and libraries
The following products are supported:
Raptor 4000 Supports 2048x2048 resolutions (digital and
analog) on a PCI bus.
Raptor 4000/e Supports 2048x2048 resolutions (digital and
analog) on a PCI Express bus.
The software supports Solaris 9 and 10. Please contact Tech
Source at [email protected] if you need support for a
different version of Solaris OS.