Tech Source Raptor 4000 (for Solaris) - Manual (Page 20)

Raptor 4000/4000e Drivers (Solaris)
16
If no specific client program is given on the command line, xinit
will look for a file in the user's home directory called .xinitrc to
run as a shell script to start up client programs. If no such file
exists, xinit will use the following as a default:
xterm -geometry +1+1 -n login \
-display :0
If no specific server program is given on the command line, xinit
will look for a file in the user's home directory called
.xserverrc to run as a shell script to start up the server. If no
such file exists, xinit will use the following as a default:
X :0
Note that the following example assumes that a program named X
is in the current search path. The xinit script is located in the
/usr/openwin/bin directory.
To startup the server using xinit, type:
prompt% xinit -- /usr/openwin/bin/X -dev \
/dev/fbs/rapafp0
You may also add any other command line arguments to the end
of the line. For additional information on the use of xinit, refer to
the man page for xinit.
4.1.3 Raptor as the Secondary
Framebuffer
The Raptor 4000/4000e card can work with other cards to display
in multi-screen mode. In the following example, an Nvidia video
card is assumed to be the console and a Raptor 4000/4000e is the
secondary card.