Tech Source Raptor 4000 (for Solaris) - Manual (Page 13)

9
prompt# cd /cdrom/cdrom0/
If
/cdrom/cdrom0 does not exist, mount the CD-ROM by
typing the following:
prompt# mount -F hsfs -O -o ro \
/dev/dsk/c0t6d0s0 /cdrom
prompt#
cd /cdrom/
6.
To install the software, type:
prompt# ./install_all
This script will ask you a number of yes-or-no questions
(generated by Sun's pkgadd installation program).
Answer these questions appropriately.
7.
To install the MOX module and libraries type:
prompt# cd /cdrom/cdrom0/mox
or
prompt# cd /cdrom/mox
[if the CD-ROM was mounted as outlined in Step 5 above]
prompt# pkgadd –d . TSImox
Note: You must install the MOX package in order to use the MOX
extension.
8.
Reboot the system to complete the installation.
One new device name is created in the /dev/fbs
directory for each Raptor card. It is denoted by rapafp#
for the Raptor 4000/4000e card (where # represents an
instance number assigned by the operating system).