Tecfluid CU Series - Manual (Page 37)

37
11.2 Port connection
In the "Port" section, choose the appropriate port for the converter. This will appear with the
name of the port followed by CU100 and its serial number. Then click "Open".
Once the port is open, the button "Open" in the "Installation" section activates.
11.3 Access to installation and programming
In order to access the tab "Install", you must enter a password.
The default password is install, and it can be changed using the boxes on the right of the
"Installation" section.
Likewise, to access the tab "Programming" it is necessary to enter the password which by
default is program. This can be changed using the boxes on the right of the "Programming"
section.
11
ASSOCIATED SOFTWARE WINSMETER CU