Tecfluid CU Series - Manual (Page 34)

34
10 MAINTENANCE
No special maintenance is required .
For cleaning, a humid cloth can be used, and if necessary with a little neutral soap.
Solvents or other aggressive liquids which could damage the housing material should not
be used.
10.1 Fuse
In the event that the fuse blows, this should be replaced with a slow blow “T” fuse, size
Ø5 x 20 mm and value 250 mA.
9 DEFAULT SCREEN
When exiting the menu, the display shows the default screen. To scroll between the three
operating screens, press the key (2) or (8).
10
If the device detects no signal at the transducers, because the attenuation is very high, or
due to a bad connection or broken cable, the operating display appears as an informative
screen indicating this situation
.
DEFAULT SCREEN
9