Tecfluid CU Series - Manual (Page 11)

11
To change the access password of
the programming menu, select
"Programming" in the main menu
and then "Password".
4 MAIN MENU
To access the main menu of the converter, press the key (OK). The following screen
appears:
4
To change the access password of
the installation menu, select
"Installation" on the main menu and
then "Password".
The "Installation" option allows the installation of the transducers, as explained in Chapter
5 of this manual.
The "Programming" option allows to program all parameters of the converter, as
explained in Chapter 6 of this manual.
From the "Reset totalizer" option, the user can return the totalizer to zero. When exiting
the menu, the totalizer will begin to accumulate again.
The options "Software Version" and "Serial Number" are informative and are discussed in
Chapters 7 and 8 of this manual.
4.1 Passwords to access the menus
To access the installation and programming menus, a password must be entered. At first
access, the default password is 0123.
The password for the installation menu may be different from the password for the
program menu. If you want to change any of these passwords, you must enter the
corresponding menu and once inside, access the submenu "Password".
Number of menu items
Selected item
MAIN MENU