Teac GVI - Manual (Page 29)

29
CHAPTER 6: MIDI MIXER
MIDI MIXER CONTROLS
Each MIDI mixer Channel and Sub-Channel (Stacked Instrument member)
has a full complement of mixer-like controls. Following is a numbered
diagram and description of each parameter found in the MIDI Mixer view.
1. Channel Slot – The channel slot field is where you load and detach
instruments to a particular MIDI channel. Once an instrument has been
attached to a channel or sub-channel, the name of that instrument appears
in the channel slot field. Clicking on the Channel Slot drop-down menu
opens a channel specific menu that allows you to Load, Stack, or Detach
instruments, open the ‘Loaded Instruments’ dialog, or edit Stack and
Channel properties (keyboard mapping).
2.MIDI activity light – illuminates when the channel is receiving MIDI data
3. Mute – silences a channel’s incoming MIDI
4. Solo – silences the incoming MIDI of all other channels so you hear only
the soloed channel
5. FX – displays the GigaPulse view for instruments that have embedded
convolution. If there is more than one instance of GigaPulse embedded
in the instrument, a popup menu will appear allowing you to select
the desired instance. This button will appear green when embedded
convolution is present on a channel.