Chapter 5: user interface basics, Sliders, Knobs – Teac GVI User Manual
Page 27
27
CHAPTER 5: USER INTERFACE BASICS
GVI’s interface can be as simple or as complex as needed and is divided into three basic
sections: the MIDI Mixer (default), the Instrument editor (QuickEdit), and the GigaPulse/
FX editor. All three of these sections share the same set of graphical controllers and
fields.The following section explains the use of these basic controls.
SLIDERS
●
Click on the slider button and drag right or left to adjust the value.
As soon as you click, the cursor hides to make for easier adjustments.
●
Hold the Shift key while dragging for finer adjustments.
●
Ctrl-click on the slider to set it to the default value.
●
To enter a number directly, click within the slider’s value field and type
in a number. Be sure to hit ‘Enter’ to apply the value.
KNOBS
●
Click on the knob and drag up or to the right to
move the knob clockwise.
●
Click on the knob and drag down or to the left
to move the knob counter-clockwise.
●
For fine adjustments, hold the Shift key while
dragging.
●
Ctrl-click on the knob to set it to the default
value.
●
To enter a number directly, click within the
knob’s value field and type in a number.
Be sure to hit ‘Enter’ to apply the value.