Teac US-200 - Manual (Page 9)

TASCAM US-200
9
8 LEVEL knob
Use this to adjust the level output from
the LINE OUT 1/2 jacks and the PHONES
jack. This does not adjust the level output
from the LINE OUT 3/4 jacks.
CAUTION
Before connecting headphones, turn the
LEVEL knob to minimize the volume. Failure
to do so might cause sudden loud noises,
which could harm your hearing or result in
other trouble.
9
MON MIX knob
Use this knob to adjust the balance
between the signals input through the
unit’s connectors (MIC IN and LINE IN)
and the signal output from the computer
by USB. Turn it all the way to the left
(INPUT) to output and monitor only the
signals input through the unit, and turn
it all the way to the right (COMPUTER) to
output and monitor only the signals sent
from the computer by USB.
0
Gain knobs
Use these to individually adjust the input
levels of MIC/LINE/INST IN 1 and MIC/
LINE IN 2 connectors. Turn them all the
way to the left to minimize the level and
all the way to the right to maximize it.
2 − Names and Functions of Parts