Teac DR-10C - Manual (Page 20)

20
TASCAM DR-10C
Menu item Summary
Setting items
(default value
underlined)
Explanation
BATTERY TYPE Battery setting ALK/NiMH/LITH
Use this to set the type of battery used.
This setting is used to show the amount of remaining battery charge and determine if the unit has enough power
for normal operation.
ALK: Alkaline AAA battery
LITH: Lithium AAA battery
NiMH: Ni-MH AAA battery
DATE/TIME
Internal clock
setting
Year/month/
date/hour/
minute
YY-MM-DD
HH:MM
“YY-MM-DD HH:MM”
1 2 3 4 5
1
: YY (year), 2: MM (month), 3: DD (date), 4: HH (hour), 5: MM (minute)
Press the 7’9 [ENTER] button to move the cursor from left to right: 1q2q3q4q5.
When the cursor is at 5 on the far right, press the 7’9 [ENTER] button to confirm the date and time and
return to the Menu Screen.
Use the . [j] and / [k] buttons to change the number at the cursor position.
SYSTEM INIT
Restore factory
default settings Sure? YES/NO
Use this to restore the various settings of this unit to their default values (factory settings).
YES: Initialize the settings. After initializing completes, the Menu Screen reappears.
NO: Return to the menu screen.
VERSION INFO
Shows the
firmware version Vx.xx xxxx
This is the firmware version used by the unit.
When the version is being shown, press the 7’9 [ENTER] button to return to the Menu Screen.