Teac US-428 - Manual (Page 30)

30
6.7 Aux Buttons
The AUX buttons 1 through 4 select the
corresponding AUX SEND in the
software. When an AUX LED is
illuminated, the selected AUX level is
controlled via the DATAWHEEL. To
open a channel’s Aux Send panel in
Cubasis, press one of the AUX SEND
buttons, and then the SELECT key on
any channel; the EQ/Aux Send panel for
the currently selected channel will
open.
6.8 Data Wheel
The DATA WHEEL acts as a continuous
controller, and is capable of a variety of
functions. In Cubasis, when an AUX LED is
illuminated, the level of the selected AUX
Send is controlled via the DATAWHEEL.
When no AUX LED’s are selected, the
DATAWHEEL functions as a shuttle wheel,
moving the transport in the direction the
wheel is turned.
6.9 BANK Controls and
FADER NULL
The BANK SELECT keys page between
successive banks of eight faders.
Selecting any of the eight faders will
control the corresponding channel in the
software’s internal mixer.
Illustration 6.10 - EQ Control Panel in Cubasis
Illustration 6.11 - EQ Control Panel in VST/32