Teac US-428 - Manual (Page 11)

11
11. LINE OUT
controls the level to the RCA (analog)
outputs.
HEADPHONE OUT
controls the level to the headphone
outputs.
12. AUX 1 through 4
selects the host application’s auxiliary
sends 1 through 4.
13. ASGN
Application specific key.
(In Cubasis, ASGN + Aux 1 or 2 will
enable the Aux Send for the selected
channel. ASGN + EQ band switch will
enable the EQ for the selected channel.)
F1 through F3
Application specific function keys. In
Cubasis VST, these keys perform the
following functions:
F1 - Open Audio Mixer window (when
Bank 1 is selected); open MIDI Mixer
(when Bank 2 or 3 selected).
F2 - Open VST FX Send window.
F3 - Toggle between open windows.
14. EQ GAIN
controls the gain level of chosen band of
EQ in the host program’s internal EQ.
EQ FREQ
controls the center frequency of chosen
band of EQ in the host program’s
internal EQ.
EQ Q
controls the bandwidth surrounding the
center frequency of the chosen band of
EQ in the host program’s internal EQ.
EQ HIGH
selects the highest band of EQ in the
host program’s internal EQ (up to a
maximum of four bands).
EQ HI MID
selects the upper midrange band of EQ
in the host program’s internal EQ (up to
a maximum of four bands).
EQ LO MID
selects the lower midrange band of EQ
in the host program’s internal EQ (up to
a maximum of four bands).
EQ LOW
selects the lowest band of EQ in the
host program’s internal EQ (up to a
maximum of four bands).
15. DATA Wheel
sends continuous controller information
to application. (In Cubasis, functions as
a shuttle wheel if no AUX LED’s are lit,
or as Aux Send level if Aux key is
selected.)
16. Fader NULL
when pressed, disengages physical
faders from the application. Used to
match US-428’s faders with those of the
software application’s internal mixer.
When using FADER NULL, the selected
channel’s REC and SEL LED’s indicate
the US-428’s fader position relative to
the associated channel in Cubasis’
mixer.
17. INPUT MONITOR
toggles Input Monitor adjust mode.
When the associated LED is on, the
FADER and MUTE switches for channel
strips 1,2,3 and 4 control the level of
Inputs A,B,C and D to the US-428’s
stereo output.
18. BANK Selector
pages between successive banks of
eight faders.