Teac US-224 - Manual (Page 43)

43
DIGITAL IN
Connector
: RCA pin jack
Format
: IEC60958 Type2
Input impedance:
75 ohm
Input Level
: 0.5Vp-p
DIGITAL OUT
Connector
: RCA pin jack
Format
: IEC60958 Type 2
Output Impedance:
75 ohm
Output Level:
0.5Vp-p
MIDI IN
Connector
: 5P DIN
Format
: Standard MIDI Format
MIDI Out
Connector
: 5P DIN
Format
: Standard MIDI Format
USB
Connector
: USB Down stream connector
Format
: USB Version 1.1
ADC / DAC
AD/DA Converter
24Bit, 64 times oversampling
Delay
: 17 samples (ADC), 15.4 samples (DAC)
Audio Performance
MIC INPUT
(A, B XLR Analog INPUT to
DIGITAL OUT)
Frequency Response
20 Hz - 20KHz + 0.5dB / -1.0 dB
TRIM min., -16 dBu input
S/N
Better than 93 dB A Weight
TRIM min., 150 ohm terminated
LINE OUTPUT max.
T.H.D.
Better than 0.007% at 1kHz
TRIM min., 0 dBu input
LINE INPUT
(A, B 1/4" Analog INPUT to DIGITAL
OUT)
Frequency Response
20 Hz - 20KHz, +0 .5 dB / -1.0 dB
TRIM min., +4 dBu input
S/N
Better than 93 dB A Weight
TRIM min., 150 ohm terminated
LINE OUTPUT max.
T.H.D
Better than 0.007% at 1KHz
TRIM min., +20 dBu input
LINE OUTPUT
(DIGITAL IN to LINE OUTPUT)
Nominal Output:
+6dBV
0 dBFs input, LINE OUTPUT max.
Frequency Response:
20 Hz - 20KHz, +0.5 dB / -1.0 dB
–16 dBFs input, LINE OUTPUT max.
S/N:
Better than 97 dB A Weight, 0 dBFs input,
LINE OUTPUT max.
T.H.D.
Better than 0.007% at 1KHz
TRIM min., 0 dBFS input
LINE OUTPUT max.
PHONES Output
Maximum Output:
More then 10m W + 10m
W at 1KHz, 40 ohm loaded
Frequency Response:
100 Hz - 20KHz, +1.0 dB / -3.0 dB
Nominal level, 40 ohm loaded
T.H.D.:
Better than 1 %
1KHz, Output 10m W + 10m W, 40 ohm loaded