Teac US-224 - Manual (Page 13)

13
In some cases, Add Hardware Wizard may
ask for the file "US224WDM.SYS". Should
this occur, click Browse and direct it to the
path Windows/System32/Drivers.
In some cases, Add Hardware Wizard may
ask for your Win98 CD-ROM if it is unable to
find all the needed system files. We suggest
you have it handy.
The Setup Complete dialog will appear.
Click "Yes, I want to restart my computer",
followed by the Finish button. The computer
will reboot.
Connect the US-224 to the computer, plug it
in, and turn it on. The Windows plug-n-play
will notice a new USB device and start the
Add New Hardware wizard, which will find
the needed files on its own. This will take
about 30-60 seconds.
The drivers are now installed and the US-
224 is ready to operate.
To install under Win2K or Windows XP:
Note: Run the Installer with US-224 turned
OFF.
Double click on the executable file
“US224_Win2k_Install_1_10.exe”. (The
US-224 Setup icon). The installer will run.
Click the "Setup" button. The Welcome
dialog box will appear.
Click the "Next" button. The driver files
will be installed to your hard drive.
NOTE: You may be prompted by a
message informing you that the software
you are about to install does not have a
digital certificate. Simply click “Continue the
installation anyway” and proceed.
If you are prompted to restart your
computer, do so.
Connect the US-224 to the computer,
plug it in, and turn it on. The Windows
plug-n-play will notice a new USB
device and start the Add New Hardware
wizard, which will find the three needed
files on its own. This will take about 30-
60 seconds.
The drivers are now installed and the US-
224 is ready to operate.
To install using Windows New Hardware
Wizard:
Unzip the driver files into a new (empty)
folder on the hard disk.
Connect the US-224 to the computer,
plug it in and turn it on
The Windows plug-n-play will notice a
new USB device and start the Add New
Hardware wizard.
Choose "Search for a suitable driver for
my device" and press Next
Enter the path where the drivers are
stored and press OK
After Windows finds the "firmware
download" driver, click Next
Click "Finish" · The other driver
components will be automatically
discovered and loaded
Click "Finish" if prompted, and reboot if
prompted
Illustration 3.02 - Windows 98 New Hardware Wizard