Teac US-2400 - Manual (Page 5)

TASCAM US-2400 Owner’s Manual
5
1 – Introduction
Thank you for purchasing the TASCAM US-2400
professional DAW controller. It is designed to give
you hands-on control of the most common tasks per-
formed when mixing within a Digital Audio Work-
station (DAW) environment. Its driverless design and
support for common control surface protocols means
that your new US-2400 can be set up for mixing in
just a few minutes with minimal configuration. Please take some time to look through this manual
and familiarize yourself with the US-2400’s features
and operation. We suggest you pay particular atten-
tion to the operational notes for your software appli-
cation(s) of choice. You may also want to refer to
your software’s documentation in many cases, for a
clear understanding of how certain features are inte-
grated. Your experience with the US-2400 will be
greatly enhanced by a good working knowledge of
your audio software.
Unpacking the unit
When you unpack the US-2400 you should find, in
addition to this manual: • The unit itself
• A 1.5 m USB cable
• AC power adapter and cable
• Quick Start Guide
• Warranty material
Contact your TASCAM supplier if any of these items
is missing.
About this manual
Controls and indicators on the US-2400 are marked
in this typeface:
SOLO .
Controls, messages, etc. on the computer screen are
shown in this typeface:
Press any key to con-
tinue .
Any key on a computer keyboard is shown in square
brackets, e.g.
[Enter] .
Copyright, etc.
Windows and Windows XP are trademarks of
Microsoft Corporation.
Macintosh, MacOS and MacOS X are trademarks of
Apple Computer.
Mackie Control and HUI are registered trademarks or
tradenames of LOUD Technologies Inc.
All other trademarks are the property of their respec-
tive holders.