Teac US-100 - Manual (Page 7)

TASCAM US-100
7
2 – Part Names and Functions
Front panel
Overload indicator
Signal indicator USB indicator
Headphones
connector
Output level adjustment knob
Monitoring balance adjustment knob
Input level adjustment knob
Guitar input
connector
Overload indicator (OL) •
This lights if the input level is too high.
Signal indicator (SIG) •
This lights when the input level is high enough to be
detected.
INPUT knob •
Use this to adjust the input level. Turn it right to increase the
sound volume. This functions as a gain knob, so turning it all
the way to the left (minimum) does not completely cut the
input sound.
BALANCE knob •
Use this to balance the mix of the sounds input into the unit
and the sound from the computer when monitoring. Turn it
all the way to the left to hear only the input sound or all the
way to the right to hear only the sound from the computer.
OUTPUT knob •
Use this to adjust the level output from the PHONES and
OUTPUT jacks. Turn right to increase the volume.
USB indicator •
This lights when the USB connection is working correctly.