Teac US-100 - Manual (Page 14)

14
T ASCAM US-100
Set the level of the “Device volume” to the highest
position. Do not check the “Mute.” Then, click “OK” at
the bottom of the window to close it.
6 Use the BALANCE knob to adjust the volume balance
between the computer and input signals.
Windows Vista
1 Shut down all applications, and open the “Control Panel”
from the “Start” menu.
2 Open the “Sound” panel.
NOTE
If you do not see the above panel, click “Hardware and
Sound” and then select the “Sounds” panel.
3 Click the “Playback” tab, click “Speakers: USB Audio
CODEC,” and then click “Set Default.” The green
checkmark is moved to “Speakers: USB Audio CODEC.”
4 – Application Guide