Teac US-100 - Manual (Page 15)

TASCAM US-100
15
4 Click the “Recording” tab, click “Microphone: USB
Audio CODEC,” and then click “Set Default.” The
green checkmark is moved to “Microphone: USB Audio
CODEC.”
5 To adjust the input level, use the INPUT knob on the front
panel of this unit. Adjust it so that the overload indicator
(
OL ) does not light.
Overload indicator
6 To adjust the output level, use the OUTPUT level knob on
the front panel of this unit, as well as the “Levels” tab of
the computer “Speakers Properties” control panel.
These settings adjust the level output from the line output
(
OUTPUT ) connectors and PHONES jack.
Open the “Playback” tab of the “Sound” Control Panel.
Click “Speakers: USB Audio CODEC,” and then click
“Properties” at the bottom right of the window.
4 – Application Guide