Scsi connection rules – Teac MX-2424 Tutorial User Manual

Page 43

Text mode
Original mode

- 43 -

SCSI Connection Rules

1) Only Approved SCSI devices should be connected to the MX-2424.

2) Only make SCSI connections (and disconnections) with the power off.

3) Narrow SCSI devices (DVD-RAM drives) always go at the physical end of a SCSI
chain.

4) Each SCSI device in a chain must have its own unique SCSI ID number.

5) The MX-2424 supports up to four devices on its SCSI bus.

7) A SCSI chain's total cable length should not exceed 6 feet.

8) A SCSI chain must always be properly terminated.

9) High quality SCSI cables will greatly improve the reliability of a SCSI bus.

• HOT TIP! — Approved devices are hard drives, removable media systems, and other
SCSI peripherals that have been successfully tested with the MX-2424. To see the
most current approved device list, visit our web site (www.TASCAM.com).