Teac MX-2424 Tutorial - Manual (Page 36)

- 36 -
Unloading Tracks
1) Press [VIEW/UNLOAD].
2) Select the track you want to Unload using the Track Select buttons. When you have
selected a track for unloading, the "SEL" LED of the track's Track Meter will blink to
indicate the chosen track. You will also see the track's number and name on the second
line of the LCD screen; something like this,
Track Contents:
1
Bass_1_58
3) Press [SHIFT].
4) Press [VIEW/UNLOAD] again. This unloads the track. You will also notice that your
track selection is incremented by one track, which is convenient if you want to unload
the next consecutive track.
5) To exit [VIEW/UNLOAD], press [CLEAR/CANCEL].
6) To check that you successfully unloaded the track, press [VIEW/UNLOAD] and
select the Track that was unloaded. You should see the following,
Track Contents:
1 * Blank *