Teac MMR-8 v3.0 - Manual (Page 9)

TASCAM MMR-8/MMP-16 Version 3.0 Owners Manual Update 9
MIDI Machine Control
The MMR/MMP responds to MIDI Machine Control (MMC) messages received on the unit’s
MIDI In port. To set the MMC address, go to Setup Menu 420, press Trim and set the appropriate
MIDI Device ID number for as required by the device transmitting the MMC messages to which
the MMR/MMP will respond. The range of available MIDI device ID’s is 1 to 127, with the
system default being 74.
01234567890123456789 20 position LCD character positions
420 MIDI Device Id Top: (Menu Item)
* 74 Bottom: (Encoding Type)
Supported MIDI Machine control messages are described in the next section of the documentation.
MMR/MMP MIDI Machine Control Protocol
All numerical values are hexadecimal, unless otherwise noted. For descriptions of the following
commands and responses, please refer to the MIDI Machine Control 1.0 specification, subtitled
MIDI 1.0 Recommended Practice RP-13, January 1992.
MMC Commands: Comments
01 STOP
02 PLAY
03 DEFERRED PLAY
04 FAST FORWARD
05 REWIND
06 RECORD STROBE
( RECORDER ONLY )
07 RECORD EXIT ( RECORDER ONLY )
09 PAUSE
0B CHASE
( requires time code input)
0D MMC RESET
40 WRITE
41 MASKED WRITE
( RECORDER ONLY )
42 READ
44 LOCATE
45 VARIABLE PLAY
( defaults to shuttle )
46 SEARCH ( defaults to shuttle )
47 SHUTTLE
4C MOVE
52 GROUP
54 DEFERRED VARIABLE PLAY
Note: In all velocity commands and information fields, the MMR-8 and MMP-16 support
multiples of play speed from +/- 20 with 1/1024 fractional resolution.