Teac MMR-8 v3.0 - Manual (Page 6)

TASCAM MMR-8/MMP-16 Version 3.0 Owners Manual Update 6
Version 3.0 Software Update Overview - continued
•
Pro Tools Performance Improved performance of Pro Tools support – Mounts
Mac volumes and loads Pro Tools Session files faster
•
Meter Interface Adds support for MMU-16 meter bridge. New menu
to select Local or MMR Bus for meters source
•
Serial Editor Mode improvements These enhancements added to Serial Editor Mode support:
§ Record ready tallies Front panel record tallies now output to Serial port
§ P2 Chase and Offset Commands Implemented with new menu to specify chase source
§ ONLINE change
Unit will follow P2 even when not ONLINE
§ Automatic ONLINE ONLINE state automatic when in P2 chase
§ Program Speed Play Implementation and status improvements
§ Punch Commands Directed to local machine only
§ Editor mode w/out video ref Allows Editor mode to work without video reference
§ Hybrid Protocol on Serial port Enables remote control implementation for Sound Master
and other external control devices.
•
MMR Bus Slave improvements MMR Slave units will respond locally to record
commands regardless of bus Master record status
•
Record punch change Punch during chase modes now waits for locked status
(time code / biphase chase plus video resolve).
•
Bug Fixes:
§ Slip In/Out in Feet/Frame Allows Slip In/Out to work properly in Feet Frames
display mode when there is a “local 0” offset
§ Store nudge amount Allows storing Slip In/Out amount from the front
panel
(previously worked only on remote)
§ All Safe fix All Safe on MMR Bus slave not overridden by master
§ Fix “Busy” exit Fix potential sync loss in biphase chase if system is
“Busy” while the biphase master is moving. This
typically occurred while slipping tracks.
•
Clipping display option New option to inhibit audio clipping display (light “Clip”
LED) while leaving it enabled during recording.
•
External Resolve changes Permits various combinations of External word clock
(or AES/EBU) with external frame references
(Video/Lynx/TC/Biph). Video resolve is now supported while
the sample clock is locked to the external sample source.
Causes "EXT RSLV" LED to illuminate, indicating that
external resolve is required to guarantee stable sync.
•
Parallel I/O Changes
§ Dedicated Record/Rehearse ON/OFF pins
§ Lock tally out on pin # 28
§ Punch commands directed to local machine only (including when MMR Bus master)
•
Show Mounted SCSI Devices New Setup menu provides list of all mounted SCSI drives
•
Cleanup for Macintosh Volumes Implemented Project delete and Disk Cleanup for Mac
•
TapeMode Project/Session Attributes Don’t change if sample/frame rate change