Setting the file recording mode, Stereo track recording settings, Creation of new takes when restarting recording – Teac DR-680 User Manual

Page 25: 4 – recording

TASCAM DR-680

4 Use the

DATA

wheel to select one of the following

options:

44.1kHz

(default value),

48kHz

96kHz

192kHz

NOTE

When the file format is MP3, 96 kHz and 192 kHz cannot
be selected.

5 Press the

key to return to the selection of

items on the

REC

screen.

6 Press the

key to return to the

screen.

Press the

HOME/FUNC

key to return to the Home

Screen.

Setting the file recording mode

The file recording mode can be set to a monaural file, a
stereo file or a 6-channel file.
1 Press the

key to open the

screen.

2 Use the

DATA

wheel to select the

REC

menu item,

and press the

ENTER

key to open the

REC

screen.

3 Use the

DATA

wheel to select the

FILE

item, and

press the

key or

ENTER

key.

4 Use the

DATA

wheel to select one of the following

options:

MONO

STEREO

(default value), or

6ch

NOTE

When set to MONO, a mono file is created for each

•

recorded track. When set to STEREO, a stereo file
is created for each pair of tracks (1-2, 3-4 and 5-6).
When set to 6ch, one 6-channel file is created for
tracks 1-6.
6ch cannot be selected when the file format is set to

•

MP3 or the sampling frequency is set to 192 kHz.

5 Press the

key to return to the selection of

items on the

REC

screen.

6 Press the

key to return to the

screen.

Press the

HOME/FUNC

key to return to the Home

Screen.

Stereo track recording settings

You can set what is recorded on the stereo track.
1 Press the

key to open the

screen.

2 Use the

DATA

wheel to select the

REC

menu item,

and press the

ENTER

key to open the

REC

screen.

3 Use the

DATA

wheel to select the

REC

item, and

press the

key or

ENTER

key.

4 Use the

DATA

wheel to select one of the following

options.

MIX

(default): Record a mix of the 6 inputs on the

stereo track.

DIN

Record the signal from the

DIGITAL/

SYNC IN

input jack on the stereo

track.

5 Press the

key to return to the selection of

items on the

REC

screen.

6 Press the

key to return to the

screen.

Press the

HOME/FUNC

key to return to the Home

Screen.

Creation of new takes when restarting

recording

Set whether the unit continues recording to the same
take or begins a new take when restarting recording.
This setting determines the take recorded to when
you press the

REC

key again after having pressed the

PAUSE

key to put the unit in recording standby.

1 Press the

key to open the

screen.

2 Use the

DATA

wheel to select the

REC

menu item,

and press the

ENTER

key to open the

REC

screen.

3 Use the

DATA

wheel to select the

PAUSE

item, and

press the

key or

ENTER

key.

4 – Recording