Teac DR-680 - Manual (Page 18)

18
TASCAM DR-680
Using menus
In this example, we show how to change the sampling
frequency.
1 Press the
MENU key to open the
MENU
screen.
2 Use the DATA wheel to select the desired menu
item, and press the ENTER key to open the menu
item screen.
3 Use the DATA wheel to select the desired item.
4 Press the key or ENTER key to move the
cursor to the setting value.
5 Use the DATA wheel to change the setting.
6 If you want to set another item within the same
menu, press the key to return to the selection
of setting items, and use the DATA wheel to select
the next item that you want to set.
7 Repeat steps 4–6 as necessary to set other items.
8 Press the
MENU key to go back one level in the
menu.
Press the HOME/FUNC key to return to the Home
Screen.
Operation basics
Use the following controls to operate the various
settings screens.
MENU key
Press to open the
MENU
screen when it is not already
open.
When the
MENU
screen is open, press the MENU key to
go back one level in the menu.
DATA wheel
Use to select items and to change values.
ENTER key
Press to confirm the selection of a setting item, and to
select “YES” on a confirmation pop-up message.
key
Press to move the cursor right in a settings screen and
to open a folder on the
BROWSE
screen.
key
Press to move the cursor left in a settings screen and to
close a folder on the
BROWSE
screen.
Press to select “NO” on a confirmation pop-up
message.
HOME/FUNC key
When a settings screen is open, press the
HOME/
FUNC key to return to the Home Screen.
Functions Screen
When the Home Screen is open, press the HOME/
FUNC key to open the Functions Screen.
NOTE
This screen cannot be accessed during recording or when
in recording standby.
On the Functions Screen, you can view and activate
the following items.
Repeat
Pre-record
Auto-record
Limiter
Low-cut filter
1 When the Home Screen is open, press the HOME/
FUNC key to open the Functions Screen.
2 Use the VALUE knob to move the cursor to select
the item to set.
2 – Names and Functions of Parts