beautypg.com

Module screens, On-screen fader adjustment, Phase – Teac DM-24 Addendum User Manual

Page 5: Use of module setup screen

background image

TASCAM DM-24 2.0 release notes

5

DM-24 version 2.0—Release notes—Module screens

Module screens

The following items refer to the basic module set-
tings (see “Module operations” on page 51 of the
main manual).

On-screen fader adjustment

It is now possible to move the cursor to the on-screen
fader representation in the module screen and use
POD 4 to adjust the level of the fader. This allows
you to make the smallest possible increments to the
fader supported by the DM-24.
You may need to hold down the

2ND F.

key to make

the most subtle changes to the fader value, depending
on whether the single-step or coarse setting (“Fine
value settings using the PODs” on page 15)
is
selected using the

OPTION SETUP

screen. This can be

useful when you want to make very subtle changes to
a mix.

Phase

In previous versions of the software, the phase set-
ting was shown on the screen with the phase symbol
(

Φ

). See “Phase switch” on page 53 and “Phase” on

page 63 of the manual.

The screen now shows the word

PHASE

, rather than

the symbol.

Use of module setup screen

The cursor moves in a more “natural” way between
options on the

MODULE

screens.

If a row is highlighted, and the screen is switched
from, say, the EQ settings screen to the dynamics
screen, the highlighted row on a particular screen is
memorized and highlighted the next time you return
to that screen.

Also, the layout of the

SETUP

screen has been slightly

changed, as shown here: