Teac DM-24 Addendum - Manual (Page 13)

TASCAM DM-24 2.0 release notes
13
DM-24 version 2.0—Release notes—Surround mode
It is now possible to select individual (mono) Aux
send busses for output in this way. In this case, the
left channel of the digital output is used for the Aux
send.
Assignable inserts
The assignable inserts can now be used with the L-R
stereo buss.This allows any effect you are inserting
to be “monitored” directly (this can be very useful
when mixing to a digital recorder). It also allows you to send a compressed stereo signal
to digital outputs 1 and 2.
Surround mode
LPF on the Boom channel
This allows you to send only those frequencies below
those selected on the LPF to the boom (LFE) chan-
nel. The choices are
80Hz
,
120Hz
or
OFF
.
Center channel percentage You can now set
the amount of signal allowed into the center channel
(set as a percentage). If this center channel is
reserved for dialog, you may not want effects intrud-
ing into it, and you may want to reduce the level sent
to this channel for these effect tracks (an on-screen
switch is also provided).
The switch and percentage level are shown in the
screen above.