Teac DM-24 Addendum User Manual
Page 21

TASCAM DM-24 2.0 release notes
21
DM-24 version 2.0—Release notes—GPI functionality
The HUI emulation, when selected, uses the first
eight channel faders of the DM-24 as hardware fad-
ers for the DAW: the faders as DAW track faders, the
hardware
MUTE
keys for the DAW mutes, hardware
REC
keys for track arming, and virtual on-screen
PODs as the DAW pan controls:.
Use the two on-screen
BANK
buttons to select groups
of eight DAW channels. All the DM-24 physical con-
trols change accordingly.
The
CHANNEL
buttons move the view of eight chan-
nels one at a time (compared to the
BANK
buttons,
which move the view eight at a time).
Use the PODs to control the DAW track panning or
the sends from A through E, as selected by the on-
screen buttons at the top of the screen.
The
SHIFT
button provides a way of using the DM-
24’s touch-sensitive faders rather than the PODs for
the aux sends, etc. by “flipping” the faders and
PODs.
Note that the DAW’s track naming capabilities are
echoed through to the DM-24, so you can see the first
four characters of the names on the DM-24 display.
Note that this may produce some problems if you are
not careful with the names, so you should use the
first four characters to identify tracks, for example,
BasD
and
BasG
rather than
Bass Drum
and
Bass Guitar
.