Teac CD-P800NT-B - Manual (Page 46)

5
Press the ENTER button to confirm the
change.
o You can also press the MENU/ENTER (.//)
dial on the main unit to do this.
6
After you complete making settings, press
the RETURN button to close the menu
screen.
CAUTION
When you press the RETURN button while viewing the
“NET Setting” submenu, “Network Save?” will appear.
Press the ENTER button to save the settings. If you
press the RETURN button, the menu screen will close
without saving the setting changes.
MP3 Setting
You can set how MP3/WAV file information is shown and
how MP3/WAV discs are played back, for example.
These settings can only be changed when the disc is
stopped.
BAD NAME
Set how MP3/WAV file information is shown.
o Regardless of the setting, characters that cannot be
shown in ID3 tag information are replaced with asterisks
(*).
Replace
If a track or folder name contains a character that cannot
be shown, “File_n” or “Folder_n” (with “n” being the track/
folder number) will be shown instead.
Not (default setting)
Characters that can be shown are shown and characters
that cannot be shown are replaced with asterisks (*).
ID3 VER.1
Set how ID3 Version 1.0/1.1 tag information is shown.
Read (default setting)
The unit will load tag information and show it.
Not Read
Tag information will not be shown.
ID3 VER.2
Set how ID3 Version 2.2/2.3/2.4 tag information is shown.
Read (default setting)
The unit will load tag information and show it.
Not Read
Tag information will not be shown.
Settings (continued)
46