Teac CD-P800NT-B - Manual (Page 14)

Connections
A B C D
DIGITAL IN
(OPTICAL)
DIGITAL IN
(COAXIAL)
L R
Power outlet
A
Analog audio output (LINE OUT) jacks
These output analog audio signals.
Use the included RCA audio cable to connect this
unit’s output jacks to the audio input jacks of an
amplifier.
Connect the white plug of the audio cable to the
white (L) jack and the red plug to the red (R) jack.
White (L) White (L)
Red (R) Red (R)
B
Digital audio output (DIGITAL OUT)
connectors
These output digital audio. Connect one of this unit’s
digital audio output connectors (COAXIAL or OPTICAL)
to the digital audio input connector of an amplifier or
digital recording device such as a CD recorder. (They
can be connected to different devices at the same
time.)
COAXIAL: Coaxial digital cable (RCA)
OPTICAL: Optical digital cable (TOS)
C
ETHERNET port
Use a commercially-available LAN cable to connect
this port to a wired network or Internet connection.
o When changing the input source, this port is iden-
tified as “NET”.
D
USB port
Use to connect a USB flash drive to the unit.
o When changing the input source, this port is iden-
tified as “USB(R)”.
o An iPod/iPhone cannot be connected here.
o Do not connect computers or similar devices to
this unit’s USB ports. Audio from computers cannot
be input through this unit's USB ports.
Audio input
Amplifier or digital
recording device (CD
recorder, MD deck, etc.)
Amplifier, etc.
RCA coaxial dig
ital cable
Optical dig
ital cable
RCA audio cable
Po
w
er cor
d
14