Teac CD-P800NT-B - Manual (Page 30)

Listening to files on a USB flash drive
When playing audio files from a USB flash drive, unless
using repeat playback set to Repeat All, only the audio files
in the same level of a single folder will be played back
(page 32).
For details about audio files that can be played back, see
“Audio files playable by this unit” on page 12.
1
Press the SOURCE button to change the
source to USB(F) or USB(R).
When using the remote control, press the USB button.
o “Not Connected” will appear when nothing is
connected.
2
Connect a USB flash drive to the selected
USB port.
or
When a USB flash drive is detected, its volume label
will be displayed.
o In this state, you can press the play/pause (7/9)
button to start playing the tracks in the first folder
that contains audio files on the USB flash drive. The
tracks will play back in order.
3
Press the MENU/ENTER (.//) dial.
The name of the track or folder appears.
o Using the remote control, you can also press the
ENTER button.
4
Turn the MENU/ENTER (.//) dial to
select a track and press the play/pause
(7/9) button.
c
This starts playback of the selected track.
30