Super Systems SD Recorder II - Manual (Page 6)

Super Systems Inc. Page 6 of 50 SD Recorder II Operations Manual
Menu and Toolbar
File Menu
Open Chart – Opens a dialog to select an existing
chart definition file from the default trend chart
directory. This menu item is the same as clicking on the
“Open File” icon on the toolbar.
If SDRecorder is operating in SDIO mode opening a
legacy trend chart file (*.ctm) will automatically convert
the file to a chart definition file (*.sdx). The original
.ctm file will be retained.
If SDRecorder is operating in Data Center mode all the
charts will have a *.sdc extension.
New Chart – Opens a new chart definition file.
This menu item is the same as clicking on the “New
Chart” icon on the toolbar.
Copy Chart – Opens a Copy Chart dialog box
that allows you to “Clone” the chart and pen
settings to an identical furnace with a different
name and Primary Group, (Channel), number.
Connect Server- Establishes a connection to the server computer data source,
either SDIO or Data Center.
Disconnect Server- Breaks the connection to the server computer data source.