Super Systems 9010 Series - Manual (Page 28)

SSi Manual Series 9010 – eSPP Programmer Page 28
Program Number to Run
This is the recipe number to run. The range is: 0 – 300.
Event 0 Through Event 16
The input box for these events has two drop-down lists. The top list contains Active and Inactive. When
active is selected, this means that the digital input is now activated. The bottom list contains Closed and
Open. This will determine how the inputs work based off of an open contact or no input and a closed
contact having a digital input made.
The Return button will return the user to the menu screen.
Aux Analog Input Setup
The Auxiliary Analog Input Setup displays the
instruments slaved to the Series 9010 and their
process variables. This is where the input type for
the slaved analog input board can be setup and if
needed a correction curved used. This section will
also allow you to calibrate the analog input board
that is selected in the drop down menu above.
Configuration
This option will allow the user to set some general
configuration settings.
The list of configurable items is:
 Log Maintenance
 Alarm Text
 Event Text
 Compact Database
 Screen Coms
 Datalogging Setup
 MiniBatch (If MiniBatch has been activated)
 Product Activation
 Read/Write Data
Log Maintenance
This option will allow the user to purge, or delete, log files, starting from a specific date. All log files from
on or before the selected date will be purged. The user can purge log files from the Alarm Log, Event
Log, or System Log.
Alarm Text
This option will allow the user to modify the text for Programmer Alarm 0 – Programmer Alarm 99.
Programmer alarms are internal, non-modifiable alarms that are triggered when there is a certain
condition in the 9010 programmer. The text for the programmer alarms can be modified to more
accurately describe these conditions.
Event Text