Custom, Fpga, Memories – Sundance SMT407 User Manual
Page 30: Dsps, Shbs, Rsls
Version 1.0.0
Page 30 of 38
SMT407 User Manual
Custom
The ordering code for custom configuration is as follows:
SMT407–VP50-5-x-D
Board Type
Virtex II part
Virtex II speed grade
On-board SDRAM in MB
With DSPs
FPGA
Part options: VP20, 30, 40, 50
Speed grades: 5, 6, 7
Memories
SDRAM (per bank/DSP): 16MB, 32MB, 64MB, 128MB
DSPs
Two Texas Instruments 1GHz 6416T DSPs
SHBs
One SHB connector is available in all configurations to allow the
implementation of up to 2x16-bit SDB interfaces.
A second SHB may be fitted to the back of the board if strict PMC compliance
is not necessary.
RSLs
One RSL connector is available in all configurations to allow the
implementation of up to 12 RSL interfaces.
A second RSL connector may be fitted to the back of the board if strict PMC
compliance is not necessary.
- SMT107 (16 pages)
- SMT6035 v.2.2 (39 pages)
- SMT6012 v.4.6 (22 pages)
- FC100 (12 pages)
- FC108 v.1.1 (10 pages)
- SMT6065 v.4.0 (45 pages)
- FFT v.2.1 (19 pages)
- SMT111 (18 pages)
- SMT118LT (10 pages)
- SMT118 (20 pages)
- SMT123-SHB (13 pages)
- SMT128 (15 pages)
- SMT145 (18 pages)
- SMT148 (35 pages)
- SMT130 v.1.0 (46 pages)
- SMT148FX (48 pages)
- SMT310Q (55 pages)
- PARS (70 pages)
- SMT166-FMC (52 pages)
- SMT166 (44 pages)
- SMT300Q v.1.6 (61 pages)
- SMT310 v.1.6 (50 pages)
- SMT317 (24 pages)
- SMT326v2 (24 pages)
- SMT338 (19 pages)
- SMT349 (32 pages)
- SMT339 v.1.3 (27 pages)
- SMT338-VP (22 pages)
- SMT358 (25 pages)
- SMT351T (37 pages)
- SMT351 (25 pages)
- SMT350 (45 pages)
- SMT362 (30 pages)
- SMT365G (23 pages)
- SMT364 (37 pages)
- SMT373 (15 pages)
- SMT368 (24 pages)
- SMT370v3 (46 pages)
- SMT377 (22 pages)
- SMT381 2007 (31 pages)
- SMT381-VP (81 pages)
- SMT387 (42 pages)
- SMT391 (18 pages)
- SMT384 (47 pages)
- SMT390-VP (55 pages)