Shbs, Shb connectors, Figure 6: shb connector – Sundance SMT407 User Manual
Page 19: Features
Version 1.0.0
Page 19 of 38
SMT407 User Manual
SHBs
SHB Connectors
The SMT407 includes two 60-pin connectors to provide SHB communication to the
outside world.
The connector is referenced on the PCB by J3 and JA3 (See
Figure 10: SMT407
Components placement-Top view and See
Figure 11: SMT407 Components
placement-Bottom view).
All 60 pins of each SHB connector are routed to the FPGA in all available
configurations of SMT407.
Figure 6: SHB Connector
Features:
High-speed socket strip: QSH-030-01-L-D-A-K on the SMT407, mates with
QTH-030-01-L-D-A-K
QTH are used for cable assembly or PCB connecting 2 PMCs.
Centreline: 0.5mm (0.0197”)
An adapter is available for Agilent probes for the 16760A Logic Analyser.
The 2 probes supported are the E5378A 100-pin Single-ended Probe and the
E5386A Half Channel Adapter with E5378A.
- SMT107 (16 pages)
- SMT6035 v.2.2 (39 pages)
- SMT6012 v.4.6 (22 pages)
- FC100 (12 pages)
- FC108 v.1.1 (10 pages)
- SMT6065 v.4.0 (45 pages)
- FFT v.2.1 (19 pages)
- SMT111 (18 pages)
- SMT118LT (10 pages)
- SMT118 (20 pages)
- SMT123-SHB (13 pages)
- SMT128 (15 pages)
- SMT145 (18 pages)
- SMT148 (35 pages)
- SMT130 v.1.0 (46 pages)
- SMT148FX (48 pages)
- SMT310Q (55 pages)
- PARS (70 pages)
- SMT166-FMC (52 pages)
- SMT166 (44 pages)
- SMT300Q v.1.6 (61 pages)
- SMT310 v.1.6 (50 pages)
- SMT317 (24 pages)
- SMT326v2 (24 pages)
- SMT338 (19 pages)
- SMT349 (32 pages)
- SMT339 v.1.3 (27 pages)
- SMT338-VP (22 pages)
- SMT358 (25 pages)
- SMT351T (37 pages)
- SMT351 (25 pages)
- SMT350 (45 pages)
- SMT362 (30 pages)
- SMT365G (23 pages)
- SMT364 (37 pages)
- SMT373 (15 pages)
- SMT368 (24 pages)
- SMT370v3 (46 pages)
- SMT377 (22 pages)
- SMT381 2007 (31 pages)
- SMT381-VP (81 pages)
- SMT387 (42 pages)
- SMT391 (18 pages)
- SMT384 (47 pages)
- SMT390-VP (55 pages)