3 programming the xilinx prom, Programming the xilinx prom, Figure 9: prom file selection – Sundance SMT368 User Manual

Page 16

Text mode
Original mode

4.3.3 Programming the Xilinx PROM

DO NOT fit the SLB mezzanine before programming the PROM via JTAG.
It makes the JTAG fail.

(It does not damage the board).

Plug the JTAG cable on JP1. The cable must be ordered from Sundance. A standard
Xilinx cable does not fit on JP1.
Run Xilinx JTAG software (Impact) and connect to the target up to the stage showed
on Figure 9.
Proceed by selecting the PROM.
Browse to a PROM file of your choice (filename.mcs) which is the configuration to be
downloaded in the PROM.
Filename.mcs should now be assigned to the PROM as per Figure 9.

Figure 9: PROM file selection

User Manual SMT368

Page 16 of 24

Last Edited: 31/12/2008 13:53:00