Sumix SMX-15M5x - Manual (Page 51)

47
Last updated: June 11, 2015
Sumix Video Camera: User Guide
Using Ext ernal Trigger
FIGURE 7.5 Trigger Output Part of Trigger subscreen
To setup High or Low level in General Purpose Output mode:
• Check General Purpose Output at the TRIGGER OUTPUT part of Trigger sub-
creen
• From proposed Level drop-down list select required level of signal
In Strobe Output Mode the camera produces the pulse with every frame.
To use Strobe Output Mode :
• Check Strobe Mode at the TRIGGER OUTPUT part of Trigger subscreen
• Select mode of Strobe Start from proposed drop-down list
• Select the value of Strobe End from proposed drop-down list
Last two options are proposed for advanced users.
If you need inverted signal, check the Invert Signal box below.
7.4 External Trigger Connector
Pinout
At the drawing below you can see pinout of external trigger connector.